In this simulator, the system is an open loop first order system
In the simulator, we assume
that G(s) is a first order system.
G(s) = Gdc/(st
+ 1)
The input is a unit step
In the simulator, the
following items can be set.
Gdc
- The DC gain for G(s)
t - The
time constant for G(s)
To operate the simulator,
Enter the parameters as
listed above.
Click the Start
button. A plot will be generated in real time.
If you want to change
anything, enter the new data, then click the Reset
button which appears when the plot is complete. That clears the plot
and brings back the start button.