Sampled
Second Order System Simulator - Decay Factor/Angular Rate
In this simulator, the system is an open loop sampled second order system,
and the impulse response is calculated.
The system has the following
parameters related to pole position. Click
here to get to the lesson which discusses these parameters.
A Decay Factor
An Angular Rate Factor
To operate the simulator,
Enter the parameters as
listed above.
Click the Start
button. A plot will be generated in real time.
If you want to change
anything, enter the new data, then click the Reset
button which appears when the plot is complete. That clears the plot
and brings back the start button.