You are at:  Elements - Sensors - LM35
Return to Table of Contents

• Why Use LM35s To Measure Temperature?
• You can measure temperature more accurately than a using a thermistor.
• The sensor circuitry is sealed and not subject to oxidation, etc.
• The LM35 generates a higher output voltage than thermocouples and may not require that the output voltage be amplified.

• What Does An LM35 Look Like?
• Here it is.

• What Does an LM35 Do?  How does it work?
• It has an output voltage that is proportional to the Celsius temperature.
• The scale factor is .01V/^oC
• The LM35 does not require any external calibration or trimming and maintains an accuracy of  +/-0.4 ^oC at room temperature and +/- 0.8 ^oC over a range of 0 ^oC to +100 ^oC.
• Another important characteristic of the LM35DZ is that it draws only 60 micro amps from its supply and possesses a low self-heating capability. The sensor self-heating causes less than 0.1 ^oC temperature rise in still air.

• TO-92 plastic transistor-like package,
• T0-46 metal can transistor-like package
• 8-lead surface mount SO-8 small outline package
• TO-202 package. (Shown in the picture above)

• How Do You Use An LM35?  (Electrical Connections)
• Here is a commonly used circuit.  For connections refer to the picture above.
• In this circuit, parameter values commonly used are:
• V_c = 4 to 30v
• 5v or 12 v are typical values used.
• R_a = V_c /10^-6
• Actually, it can range from 80 KW to 600 KW , but most just use 80 KW.

• Here is a photo of the LM 35 wired on a circuit board.
• The white wire in the photo goes to the power supply.
• Both the resistor and the black wire go to ground.
• The output voltage is measured from the middle pin to ground.l

• What Can You Expect When You Use An LM35?
• You will need to use a voltmeter to sense Vout.
• The output voltage is converted to temperature by  a simple conversion factor.
• The sensor has a sensitivity of 10mV / ^oC.
• Use a conversion factor that is the reciprocal, that is 100 ^oC/V.
• The general equation used to convert output voltage to temperature is:
• Temperature ( ^oC) = Vout * (100 ^oC/V)
• So if  Vout  is  1V , then, Temperature = 100 ^oC
• The output voltage varies linearly with temperature.
• What If You Want More Data On The LM35?
• Click here to get the National Semiconductor data sheet for the LM35.

P1.   In using an LM35, you obtain an output voltage of 0.173 v.  What is the temperature (in ^oC)?

• Temperature Sensors
• Thermistors
• Thermocouples
• LM35s
• Other Sensors
• Strain Gages
• Temperature
• Sensor Laboratories