| Publications | ||||
|
Contact me if you would like a copy of any of these publications. |
||||
Recognized and Award-Winning Papers Szykman, S., S.J. Fenves, S.B. Shooter and W. Keirouz, “A Foundation for Interoperability in Next-generation Product Development Systems,” The Most Influential CIE Papers: 1980-2000, ASME, New York, 2005. Shooter, S.B., W. Keirouz, S. Szykman, and S. Fenves, “A Model for Information Flow in Design,” Proceedings of the ASME Design Engineering Technical Conferences, September, 2000. * Won the Best Paper Award for Design Theory and Methodology Sutton, E.B., “Better Snowboards by Design,” Proceedings of the ASME Annual International Conference and Exposition, Orlando, FL, November, 2000. * This paper won the national ASME Student Design Paper Competition for a project I advised. Tidwell, P.H., S.W. Glass, J.J. Hildebrand, C.F. Reinholtz, and S.B. Shooter, "Cobra - Design and Development of a Manipulator for Nuclear Steam Generator Maintenance",Proceedings of Second National Applied Mechanisms and Robotics Conference, Vol1, November, 1991 pp IVB1-1 to IVB1-10. * W on the Proctor and Gamble Award of Merit and the George Wood Award for Best Applied Work. Journal Papers Alizon, F., C. Williams, S.B. Shooter and T.W. Simpson, “Merge-based Design: A New Method for Managing Variety and Improving Customization”, International Journal of Mass Customization, in press (accepted August, 2008). Alizon, F., Shooter, S. B., and Simpson, T. W., Assessing and Improving Commonality and Diversity, Research in Engineering Design, in press. Alizon, F., S.B. Shooter and T.W. Simpson, “Recommending a Platform Leveraging Strategy Based on the Homogeneous or Heterogeneous Nature of a Product Line”, Journal of Engineering Design, in press (accepted April 2008). Ye, Xiaoli; Thevenot, Henri; Alizon, Fabrice; Gershenson, J K; Khadke, Kiran; Simpson, Timothy W; Shooter, S. B., "Using Product Family Evaluation Graphs in Product Family Design" International Journal of Production Research, in press (accepted April, 2008). Alizon F, Shooter SB, and Simpson TW, "Improving an Existing Product Family based on Commonality/Diversity, Modularity, and Cost," Design Studies, Vol. 28, No. 4, July, 2007, pp. 387-409. Nanda, J., H. Thevenot, T. Simpson, R. Stone, M. Bohm and S. Shooter, “Product Family Design Knowledge Representation, Aggregation, Reuse and Analysis,” Journal of Artificial Intelligence in Design and Manufacturing, Vol. 21:2, 2007, pp. 173-192. H. Thevenot, T. Simpson, F. Alizon, and S. Shooter, “An Index-based Method to Manage the Tradeoff Between Diversity and Commonality During Product Family Design,” Journal of Concurrent Engineering: Research & Applications – Special Issue on Managing Modularity and Commonality in Product and Process Development, Vol 15, No. 2, 2007, pp. 127-139. Alizon, F., K. Khadke, H. Thevenot, J. Gershenson, T. Marion, S. Shooter, and T. Simpson, “Frameworks for Product Family Design and Development,” Journal of Concurrent Engineering: Research & Applications – Special Issue on Managing Modularity and Commonality in Product and Process Development, Vol 15, No. 2, 2007, pp. 187-199. Shooter, S.B. , C.M. Evans and T.W. Simpson, “Building a Better Icescraper – A Case in Product Platforms for the Entrepreneur,” Journal of Intelligent Manufacturing, Special Issue on Product Family Design and Development, No. 18, 2007 pp. 159-170. Alizon, F., S. Shooter and T. Simpson, “Reuse of Manufacturing Knowledge to Facilitate Platform-based Product Realization,” Journal of Computing and Information Science in Engineering, Vol. 6, No. 2, June 2006 pp. 170-178. Nanda, J., T. Simpson, S. Kumara and S. Shooter, “A Methodology for Product Family Ontology Development Using Formal Concept Analysis and Web Ontology Language,” Journal of Computing and Information Science in Engineering, Vol. 6, No. 2, June 2006, pp. 103-113. Shooter, S.B., T.W. Simpson, S.R.T. Kumara, R. Stone, J. Terpenny, “Toward a Multi-Agent Information Management Infrastructure for Product Family Planning and Mass Customisation,” International Journal of Mass Customisation, Vol. 1, No. 1, 2005. Shooter, S.B. and M. McNeill, “Interdisciplinary Collaborative Learning in Mechatronics at Bucknell University,” Journal of Engineering Education, Vol 91, No. 3, 2002, pg 339-344. Buffinton, K.W., Shooter, S.B., Thorpe, I.J., and Krywicki, J.J., 2001, "Laboratory, Computational, and Field Study of Snowboard Dynamics," Sports Engineering, Volume 6, No. 3, 2003 pp. 129-137. Hoffman, T.J. and S.B. Shooter, “A Study of the Evolution of Informal Visual Information in Mechanical Product Design,” Accepted for publication in Design Studies, 2003. Politis, J.L. and S.B. Shooter, “Enhancing Engineering Education: The Bucknell Product Development Center,” Industry & Higher Education, Vol. 15, No. 5, October, 2001, pp. 341-347. Szykman, S., S. Fenves, W. Keirouz, and S. Shooter, “A Foundation for Interoperability in Next-Generation Product Development Systems,” Journal of Computer Aided Design, 33 (2001) pp. 545-559. Shooter, S.B., W. Keirouz, S. Ssykman, and S. Fenves, “A Model for the Flow of Design Information in Product Development,” Journal of Engineering with Computers, 16 (2000) pp. 178-194. Shooter, S.B., C.F. Reinholtz, R.L. West, "A Unified Approach to Teaching Analytical Cam Design Using Conjugate Geometry", International Journal of Mechanical Engineering Education, Vol 23, Number 2, April 1995, pp 145-156. Tidwell, P.H., S.W. Glass, J.J. Hildebrand, C.F. Reinholtz, and S.B. Shooter, "Cobra - Design and Development of a Manipulator for Nuclear Steam Generator Maintenance", Journal of Applied Mechanisms and Robotics, Vol 1, No. 2, March 1994, pp 7-14. Book Chapters Shooter, S.B., “Product Platform Development at Innovation Factory,” textbook chapter in Product Platform and Product Family Design: Methods and Applications, Simpson, T.W., Z. Siddique, and J. Jiao editors, Kluwer Academic/Plenum Publishers, 2006. Lauria, M., Shooter, S., Siegwart, R. , “Topological Analysis of Robotic N-Wheeled Ground Vehicles”, Springer Tracts in Advanced Robotics , Vol. 24, 2006. Peer-Reviewed Conference Proceedings Shooter, S.B., S. Cohen, C. Williams, 2008, “Assessing Commonality and Differentiation for Packaging Family Planning with Application to Medication Labels,” Proceedings of ASME Design Engineering Technical Conferences – Design Theory and Methodology Conference, New York, August 3-6, 2008, ASME Paper No. DETC2008/DTM-49815. Alizon, F.J., S.B. Shooter and T.W. Simpson, 2008, “Henry Ford and the Model T: Lessons for Product Platforming and Mass Customization,” to appear in Proceedings of ASME Design Engineering Technical Conferences – Design For Manufacturing and Lifecycle Conference, New York, August 3-6, 2008, ASME Paper No. DETC2008/DFMLC-49420. Alizon, F.J., Jing Fu, T. W. Simpson S. B. Joshi, and S.B. Shooter, 2008, “Assessing Functional and Shape Differentiation Within a Family of Products,” Proceedings of ASME Design Engineering Technical Conferences – Design Automation Conference, New York, August 3-6, 2008, ASME Paper No. DETC2008/DAC-49428. Alizon, F.J., T.J. Marion, S.B. Shooter and T.W. Simpson, 2008, “Product Family Design: Strategic Principles to Choose Between Product-Driven and Platform Driven Processes,” to appear in Proceedings of ASME Design Engineering Technical Conferences – Design Automation Conference, New York, August 3-6, 2008, ASME Paper No. DETC2008/DAC-49429. Shooter, S.B., 2008, “Reverse Engineering to Design Forward: An Introduction to Engineering Experiential Learning Module with Video Podcasts,” to appear in Proceedings of the ASEE International Conference on Engineering Education, Pittsburgh, PA, June 21-24, ASEE Paper No. AC2008-1170. West, T., A. Feurstein and S. Shooter, 2008, “Using Cyber-Infrastructure Enhanced Product Dissection to Introduce Engineering to Middle School Students,” to appear in Proceedings of the ASEE International Conference on Engineering Education, Pittsburgh, PA, June 21-24, ASEE Paper No. AC2008-590. Alizon, F., J. Nanda, S.B. Shooter and T.W. Simpson, 2007, “Ontology-Based Models for Design Retrieval and Analysis,” Proceedings of the International Conference on Engineering Design, ICED’07, Paris, France, August 28-31, Paper No. 397. Alizon, F., T.J. Marion, S.B. Shooter and T.W. Simpson, 2007, “Tools for the Platform Designer’s Toolbox,” Proceedings of the International Conference on Engineering Design, ICED’07, Paris, France, August 28-31, Paper No. 398. Ye, Xiali, H. Thevenot, G. Alizon, J. Gershenson, and S. Shooter, 2007, “A Quantitative Representation of the Tradeoff between Commonality and Variety in Product Family Design,” Proceedings of the International Conference on Engineering Design, ICED’07, Paris, France, August 28-31, Paper No. 409. Hart, K.M., S.B. Shooter and T.W. Simpson, 2007, “Application of a Product Platform Knowledge Management Methodology Using the Semantic Web Paradigm to a Playground System,” Proceedings of ASME Design Engineering Technical Conferences – Computers and Information in Engineering Conference, Las Vegas, NV, September 4-7, ASME Paper No. DETC2007/CIE-34598. Alizon, F., Moon, S. K., Shooter, S. B. and Simpson, T. W., 2007, “Three Dimensional Design Structure Matrix with Cross-Module and Cross-Interface Analysis,” Proceedings of ASME Design Engineering Technical Conferences - Design Automation Conference, Liou, F., ed., Las Vegas, NV, September 4-7, ASME, Paper No. DETC2007/DAC-34510. Alizon, F., Shooter, S. B. and Simpson, T. W., 2007, “Recommending a Platform Leveraging Strategy Based on the Homogeneous or Heterogenous Nature of a Product Line,” Proceedings of ASME Design Engineering Technical Conferences - Design Automation Conference, Liou, F., ed., Las Vegas, NV, September 4-7, ASME, Paper No. DETC2007/DAC-34507. Alizon, F., Williams, C., Shooter, S. B. and Simpson, T. W., 2007, “Merge-Based Design: A New Method for Managing Variety and Improving Customization,” Proceedings of ASME Design Engineering Technical Conferences - Design Automation Conference, Liou, F., ed., Las Vegas, NV, September 4-7, ASME, Paper No. DETC2007/DAC-34541. Alizon F., Shooter S.B., Simpson T.W., 2006, “Provide Relevant Knowledge to Specify the Product Design Project Needs,” Proceedings of IEEE International Conference on Information Reuse and Integration, September. Alizon F., Nanda, J. Shooter S.B., Simpson T.W., 2006, “Increasing Design Search Relevancy using Statistical Methods in Conjunction with Ontologies,” Proceedings of IEEE International Conference on Information Reuse and Integration, September. Alizon, F., S. Shooter and T. Simpson, “Assessing and Increasing Product and Family Differentiation in the Market,” Proceedings of the ASME Design Engineering Technical Conferences, Philadelphia, Pennsylvania, September 2006, DETC2006-99538. Alizon, F., S. Shooter and T. Simpson, “Improving an Existing Product Family Based on Commonality/Diversity, Modularity and Cost,” Proceedings of the ASME Design Engineering Technical Conferences, Philadelphia, Pennsylvania, September 2006, DETC2006-99536. Alizon, F., S. Shooter and T. Simpson, “Assessing and Improving Commonality and Diversity within a Product Family,” Proceedings of the ASME Design Engineering Technical Conferences, Philadelphia, Pennsylvania, September 2006, DETC2006-99499. Alizon, F., S. Shooter and H. Thevenot, “Design Structure Matrix-Flow for Improving Identification and Specification of Modules,” Proceedings of the ASME Design Engineering Technical Conferences, Philadelphia, Pennsylvania, September 2006, DETC2006-99524. Byron, B. and S. Shooter, “Case Study: User Adoption of a Product Configuration Management System at a Modular Playground Equipment Producer,” Proceedings of the ASME Design Engineering Technical Conferences, Philadelphia, Pennsylvania, September 2006, DETC2006-9925. Simpson, T., T. Marion, O. de Weck, K. Holtta-Otto, M. Kokkolaras, S. Shooter, “Platform-based Design and Development: Current Trends and Needs in Industry,” Proceedings of the ASME Design Engineering Technical Conferences, Philadelphia, Pennsylvania, September 2006, DETC2006-99229. Sahin, A., J. Terpenny, S. Shooter, R. Stone and T. Simpson, “Evaluating Relative Instructional Effectiveness and Efficiencies of Design Activities for Product Platform Planning,” Proceedings of the ASME Design Engineering Technical Conferences, Philadelphia, Pennsylvania, September 2006, DETC2006-99517. Lukman, H., S. Shooter, F. Alizon, J. Terpenny, T. Simpson, R. Stone and S. Kumara, “Experiences with an Inter-University Collaborative Undergraduate Research/Learning Experience for Product Platform Planning,” Proceedings of the ASEE International Conference on Engineering Education, Chicago, Illinois, June, 2006. A. Sahin, J. Terpenny, S. Shooter, R. Stone, and T. Simpson, “A Method to Evaluate Relative Instructional Efficiencies of Design Activities for Product Platform Planning,” Proceedings of the ASEE International Conference on Engineering Education, Chicago, Illinois, June, 2006. Fledderjohn, M., S. Shooter and R. Stone, “Augmenting a Design Repository to Facilitate Product Family Planning,” Proceedings of the ASME International Mechanical Engineering Congress and Exposition, Orlando, Florida, November, 2005, IMECE2005-81846. Byron, B. and S. Shooter, “An Introduction to Innovation Adoption Theories for Design of a Product Family Information Management Infrastructure,” Proceedings of the ASME International Mechanical Engineering Congress and Exposition, Orlando, Florida, November, 2005, IMECE2005-79933. Alizon, F., S. Shooter and T. Simson, (2005) “Introduction to the REUSE Method: Retrieving Knowledge from Existing Module Designs,” Proceedings of the ASME International Mechanical Engineering Congress and Exposition, Orlando, Florida, IMECE2005-80929. Nanda, J., T. Simpson, S. Shooter and R. Stone, “A Unified Information Model for Product Family Design Management,” Proceedings of the ASME Design Engineering Technical Conferences, Long Beach, California, September 2005, DETC2005/DAC-84869. Byron, B. and S. Shooter, “A Review of Software Solutions for the Management of New Product Development and Product Family Planning,” Proceedings of the ASME Design Engineering Technical Conferences, Long Beach, California, September 2005, DETC2005/DAC-84454. Srinivasan, A., Terpenny, J., Shooter, S., Stone, R., Simpson, T., and Kumara, S. (2005) “ Online Case Studies and a Process Description for Product Platform Planning,” Proceedings of ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC2005-85338. Van Wie, M., R. Stone, A. Sahin, J. Terpenny, F. Alizon, S. Shooter, and T. Simpson, “A Qualitative Modeling Method for Platform Design”, IEEE International Conference on Simpson, T.W., Stone, R.B., Shooter, S.B., Terpenny, J.B., Kumara, S.R.T., “An Inter-University Collaborative Undergraduate Research/Learning Experience for Product Platform Planning,” Proceedings of 2005 ASEE International Conference. Srinivasan, A., Terpenny, J.B., Shooter, S.B., Stone, R.B. and Simpson, T.W., “An Online Learning Tool for Product Platform Planning,” Proceedings of 2005 ASEE International Conference. Shooter, S.B., T.W. Simpson, S.R.T. Kumara, R. Stone, J. Terpenny, “Toward an Information Technology Infrastructure for Product Family Planning and Mass Customization,” Proceedings of the ASME Design Engineering Technical Conferences, Salt Lake City Utah, September, 2004 . Nanda, J., H.J. Thevenot, T.W. Simpson, S.R.T. Kumara and S.B. Shooter, “Exploring Semantic Web Technologies for Product Family Planning,” Proceedings of the ASME Design Engineering Technical Conferences, Salt Lake City Utah, September, 2004. Lamon, P., A. Krebbs, M. Lauria, S. Shooter, and R. Siegwart, “Wheel Torque Control for a Rough Terrain Robot Rover,” Proceedings of the IEEE International Conference on Robotics and Automation, New Orleans, April, 2004. Nowakowski, C. and S.B. Shooter, “Design and Development of an Animatronic Face,” Proceedings of the International Conference on Advanced Robotics, Coimbra, Portugal, June 2003. Lauria, M., S. Shooter, and R. Siegwart, “Topological Analysis of Robotic N-wheeled Ground Vehicles,” Proceedings of the IEEE International Conference on Robotics and Automation, Taiwan, August, 2003. Hoyt, B., M. Prince, S. Shooter, M. Hanyak, E. Mastascusa, W. Snyder, M. Toole, M. Higgins, D. Hyde, M. Wagner, and M. Vigeant, “Engineering Engineering Education – A Conceptual Framework for Supporting Faculty in Adopting Collaborative Learning,” Proceedings of the Annual ASEE Engineering Education Conference, Nashville, Tennessee, June 2003. Shooter, S.B., “Design of a Robotic Rig for Testing Bicycle Transmissions,” Proceedings of the 2002 International Conference on Intelligent Robots and Systems, Lausanne, Switzerland, September, 2002. Hoffman, T.J., S.B. Shooter, C.J. Zappe, and M.R. O’Donnell, “A Study of Risk Communication in Engineering and Management Curricula,” Proceedings of the Annual ASEE Engineering Education Conference, Montreal, June 2002. Prince, M., M. Hanyak, B. Hoyt, D. Hyde, E. Mastascusa, W. Snyder, T. Toole, M. Higgins, S. Shooter, M. Wagner, M. Vigeant, M. Aburdene, “A Conceptual Framework for Progressively Developing Students’ Team and Problem Solving Skills Across the Curriculum,” Proceedings of the Annual ASEE Engineering Education Conference, Montreal, June 2002. Hoffman, T.J., S.B. Shooter, S. Szykman and S. Fenves, “An Investigation of Catalogued Product Development Information at a Major Consumer Products Company,” Proceedings of the ASME 2001 Design Engineering Technical Conferences, Pittsburgh, Pennsylvania, September, 2001. Buffinton, K.W., Shooter, S.B., Thorpe, I.J., and Krywicki, J.J., 2001, "Laboratory, Computational, and Field Study of Snowboard Dynamics," Proceedings of the 2001 TMS Materials and Science in Sports Symposium. Politis, J.L. and S.B. Shooter, “Enhancing Engineering Education with the Bucknell Product Development Center,” Proceedings of the Conference on Industry and Education Collaboration, San Diego, CA, January, 2001. Szykman, S., S. Fenves, W. Keirouz, and S. Shooter, “A Foundation for Interoperability in Next-Generation Product Development Systems,” Proceedings of the ASME Design Engineering Technical Conferences, September, 2000. Sundberg, J.S. and S.B. Shooter, “Investigating Design Methods through the Design of an Automated Soap Wrapper,” Proceedings of the ASME Design Engineering Technical Conferences, September, 2000. Latchford, W., S. Shooter, A. Spak, J. Spangler, D. Wagner, and S. Wenner, “Reinforcing High School Physics by Designing and Fabricating a Scale Model Roller Coaster,” Proceedings of the ASME Annual International Conference, Orlando, Florida, November, 2000. Shooter, S.B. and C.A. Shooter, “Enhancing Design Education By Processing the Design Experience,” Proceedings of the ASEE Annual Engineering Education Conference, Saint Louis, Missouri, June, 2000. Shooter, S.B. and M. McNeill, “Interdisciplinary Collaborative Learning in Mechatronics at Bucknell University,” Proceedings of the ASEE Annual Engineering Education Conference, Saint Louis, Missouri, June, 2000. Shooter, S. B., W. Keirouz, P. Hart, and K. Lyons, “The Open Assembly Design Environment: An Architecture for Design Agent Interoperability,” Proceedings of the ASME Design for Manufacturing Conference, Las Vegas, Nevada, September, 1999. Shooter, S. B., “Design and Development of the PikRite Chili Pepper Harvester,” Proceedings of the 1999 Frontiers in Education Conference,Puerto Rico, November, 1999. Shooter, S. B., “Automated Motion Program Formulation for Cam Mechanism Design”, Proceedings of the 24 th Biennial ASME Mechanisms Conference, Atlanta, Georgia, September, 1998. Sanders, J. and S.B. Shooter, “Design of an Animatronic Eye”, Proceedings of the 24 th Biennial ASME Mechanisms Conference, Atlanta, Georgia, September, 1998. Shooter, S.B., “A Proposed Model for Decision Support Systems in Mechanical Design”, Proceedings of the International Conference on Engineering Design and Automation, Maui, Hawaii, August, 1998. Shooter, S.B. and C.F. Reinholtz, “AutoCam - A Modular Decision Support System for the Design of Cam Mechanisms”, Proceedings of the 1997 ASME Design Automation Conference, Sacramento California, September, 1997. Shooter, S.B., “A Systems Engineering Design Experience for the Machine Design Curriculum”, Proceedings of the 1997 Frontiers in Education Conference, Pittsburgh, Pennsylvania, November, 1997. Shooter, S.B., P.H. Tidwell, and C.F. Reinholtz, "Analytical Approach to Cam-Modulated Linkage Synthesis Using Conjugate Geometry", Machine Elements and Machine Dynamics in the Proceedings of the 23rd ASME Biennial MechanismsConference, Minneapolis, Minnesota, DE-Vol 71, September, 1994, pp 223-232. Fallon, J.B., S.B. Shooter and C.F. Reinholtz, "URSULA - Design of an Underwater Robot for Nuclear Reactor Vessel Inspection", Proceedings of the 4th International Conference on Robotics for Challenging Environments, Albuquerque, New Mexico, February, 1994, pp. 311-319. Shooter, S.B. and C.F. Reinholtz, "Extrinsic Calibration of Portable Manipulators", Proceedings of the 22nd ASME Biennial Mechanisms Conference, Scottsdale,Arizona, DE-Vol. 45, September, 1992, pp 501-507. Shooter, S.B., C.F. Reinholtz and S.G. Dhande, "On The Kinematic Design of Manipulators for Limited Access WorkSpaces (LAWS)", Proceedings of the 22nd ASME Biennial Mechanisms Conference, Scottsdale, Arizona, DE-Vol. 45, September, 1992, pp 493-500. Other Conference Papers Simposn, T., S. Shooter, J. Terpenny, R. Stone, S. Kumara, V. Allada, M. Scott, “Recent Advances in an Information Management Infrastructure to Support Product Family Planning and Mass Customization,” Proceedings of the NSF Design, Service and Manufacturing Grantees and Research Conference, St. Louis, Missouri, July 2006. Simpson, T.W., Kumara, S.R.T., Shooter, S.B., Stone, R.B. and Terpenny, J.P., "An Investigation of Semantic Web Technologies for Product Family Modeling," Proceedings of the NSF Design, Service and Manufacturing Grantees and Research Conference, Scottsdale Arizona, January 2005. Select Technical ReportsLaszewski, M. and S.B. Shooter, “Development of a Software System for Managing Product Development Information in Small Businesses”. Hoffman, T., S. Shooter, and S. Szykman. “Verification of the Information Flow Model for Product Design,” Internal Report of the National Institute of Standards and Technology, August, 2000. (Peer reviewed internal report publication). Shooter, S.B. et al. (Contributing Author). PDC Consultant’s Manual, Bucknell University Small Business Development Center, August, 1999. Keirouz, W., S. Shooter, and S. Szykman, “A Model for the Flow of Design Information in OpenADE,” Internal Report of the National Institute of Standards and Technology, September, 1999. (Peer reviewed internal report publication).
|
||||
|
Masters Theses Advised |
||||